Country：Italy
Customer Code：2403 Country：Italy Capacity：250 kg/h Pelletizing system：air cooling strand pelletizing line Extruder：TSE-75 Material：PBAT+PLA+other biodegradable material
Plastic Kneader Compounding Extruder Line
Introduction of Pressed Kneader
Dispersion Mixer has become the most commonly used type of mixer in the rubber and plastics industries. The tilt mixer with its uniquely designed rotors, rotor blades, mixing chamber and pressure lid allows for thorough material flow and controlled shear mixing within the mixing chamber. This intensive mixing achieves a uniform compound mixture with exceptional dispersion of materials.
Main Application
Rubber & TPR,EVA,Rubber sole, Rubber Roller, Hoses Belts, Vibration Insulator, Elastic Cord, Sealing Materials, Tire, Tapes, Master Batches, Pigment Ink, Automobile Electric Rubber Parts, Chemical Industry Compounds.
Structure
The screw extrusion type kneader is mainly composed of five major parts: mixing and kneading part, screw extrusion part, machine base part, hydraulic system, transmission system, and electric control system.
Feature for Dispersion Kneader
Maximum Dispersion & High Production
Double blades with special spiral angle, proper clearance and high cooling effect give excellent dispersion which can not be obtained from open mill. Its production is 4 to 5 times more than an ordinary mixing mill thus saving on labor and electricity.
No Powder Leakage
Both sides of the rotor blades are injected welding a iron alloy ring, which assures sealing and protects the blades from abrasion. Imported bakelite sealing ring, which make super sealing. The chamber around are designed with groove, then embeded with rubber stip, this make sure the whole mixing chamber is well sealedm and prevented environmental pollution.
Easy Cleaning & Color Change
Mixing chamber can be tilted down for 140 degree, which enables easy cleaning, because of this, different coloured compounds can be made without trouble.
Easy Operation
Easy operation with Push-buttons and hand lever valves from the operation board. Automatic temperature and time control system
Short Mixing Time
Mixing time ranges from 6 to 12 minutes depending on compound’s specific gravity. Its output equivalent to 2 units of mixing mill.
| Model | X(S)N-75 | X(S)N-110 | |
| Effective Mixing capacity | L | 75 | 110 |
| Main power | KW | 90/110 | 160/200 |
| Brake Motor | KW | 4 | 5.5 |
| Tilting Degree | ℃ | 140 | 140 |
| Air compressor | KW | 10 | 10 |
| Dust Collector | HLL-20 | HHL-30 | |
| Cooling Water | MPA | 0.3-0.4 | 0.3-0.4 |
| Heating Steam | MPA | 0.5-0.8 | 0.5-0.8 |
| Electric Heater | KW | 18 | 24 |
| Machine Weight | KG | 10500 | 14500 |
| Overall Dimension | CM | 380×214 X318 | 440×276 X377 |
Projects
How can we help you?
Send us email or fill in below contact form. We will reply your message as soon as possible.