Views:4 Author:Site Editor Publish Time: 2018-03-19 Origin:Site
maintenance of caco3 twin screw extruder
1, Transmission system:
(1) Check the temperature rise of the motor and fuel tank, whether the bearing local overheating, motor and gear abnormal noise, oil spill, oil filter, spline shaft radial circular runout and screw end contact clearance.
(2) regularly clean the oil filter and clear the bottom of the tank to precipitate dirt, and regular lubrication point refueling. (3) New gear transmission box running "running-in", should replace the new oil, after each operation 4,000 hours, replace the new oil. Machine parts name refueling grade replacement cycle mixer transmission Part 150th gear oil 4,000 hour cone double forced feeder distribution box high temperature butter (grease) 4,000 hour hoist gearbox 150th gear oil 4,000 hour twin screw main engine gearbox 150th gear oil 4,000 hour single screw
Rod main engine gearbox 150th gear oil 4,000 hour cutter bearing high temperature butter (grease) 4,000 hours 2, host: Check the unobstructed cooling water, temperature (general ∠26℃), feeding situation, tube temperature and pressure, screw and cylinder body of the damage situation. 3, Nose: the size of porous plate loss, surface damage and corrosion of the flow, whether blocking and affect the product appearance and output.