The parallel co-rotating PP/PE compounding extruder machines are designed by suing the "toy bricks" principle, the screw configuration, barrel setup, L/D or mode of feeding and venting, screen changing, way of granulating, and the control mode can be optimally adjusted according to different materials properties and requirements in consideration of the versatility in each general applications.
|Mode || |
|L/D || |
|Power(kw) || |
|TSE-40B ||41 ||32-52 ||600 ||45-55 ||100-160 |
|62.4 ||32-64 ||600 ||90 ||250-350 |
|TSE-75B ||71 ||32-64 ||600 ||132 ||350-550 |
|TSE-75D ||71 ||32-64 ||600-800 ||200-250 ||600-800 |
|TSE-95B ||93 ||32-64 ||600 ||315 ||800-1200 |
TSE\TSH co-rotating twin screw extruder is able to process materials as follow:
Filling and modification
General and fibre color masterbatch
Blending modification (rubber & plastic blending, plastic alloy)
Glass fibre or carbon reinforcement
Various cable material
Handling after dewatering
· New-style project of parallel three-axises driving makes the convey axis, convey chain, decelerate and the torque assignment get together, which keep it compact, and the key bearings are imported.
·The select material of drive components of parallel co-rotating machine is dainty, including super intension alloy cementiteing steel, cementiting and quenching, gear grinding technics, strengthening of tooth face. So they can ensure high torque, high precision and low noise.
· Soakage and coerce lubrication integrate smoothly. When the hydraulic circuit is over pressed, it alarms.
2.The feeding system
·The metering feeders of PP/PE compounding extruder machine is equipped with single screw, twin screw, hollow screw, forced-feeding, side feeding, liquid-adding system,etc.
·The screw elements and then kneading blocks are designed accurately, by precise processed, agile combination, with interchangeability, which can fulfill efficient self-cleaning, transmission, compounding, pressure-forming. Good combination and design, can make parallel co-rotating extruder machine have a multiplier effect.
· The screw material is made of high tool steel 38CrMoALA or W6Mo5Cr4V2 by special heat-treament.
· Eurostyle rectangle barrel, reflux refrigeration is optimized and disposed, which makes temperature difference in C areas smaller.
· According to the material and special techinics demands, the material of cylinder can use high quality nitrided steel, corrosion proof or antifriction with corresponding process.
·Innovated design of heater tightened style insures high efficiency of heat transfer and high longervity of heater, in order to ensure that parallel twin screw extruder can work better for you.
· Variou modes of pelletizing, such as water-cooling strand, air-cooling pelletizing, water-ring pelletizing, under water pelleting, etc.
Exhibition in Chinaplas: